LANTRONIX TN-SFP-LX8 Gigabit Ethernet Small Form Factor Pluggables 1000BASE-LX 1550 nm single-mode LC [80 km/49.7 miles]

Features

• Auto-Negotiation (802.3u)Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.
• Link Pass ThroughLink Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal.
• Pause (IEEE 802.3xy)Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed.
• Extended multimode SX capability(up to 2 km 62.5/125 m fiber)
• Automatic Link RestorationTransition Networks’s converters will automatically re-establish link in all network conditions.

Specification Description

Port One: 1000BASE-SX 850nm multimode (SC) [62.5/125 m: 220 m/722 ft.
50/125 m: 550 m/1804 ft.]
Single-mode.Power: External AC/DC included
12V DC, 0.5 A unregulated
Single-mode.Warranty: Lifetime
Single-mode.Shipping Weight: 2 lbs. [0.9 kg]
Se-mode.Status Leds: PWR (Power): Lit for normal operation LKS (Single-mode Fiber Link): ON = Fiber Link LKM (Multimode Fiber Link): ON = Fiber Link ACT (Activity): Blinking = data reception on either fiber link
Single-mode.Power Consumption: 3.5 watts
Single-mode.Safety Compliance: Wall Mount Power Supply: UL Listed and CSA certified
Port Two: 1000BASE-LX 1310nm TX/1550nm RX single fiber single-mode (SC) [20 km/12.4 mi.]
Single-mode.Dimensions: Width: 3.25" [82 mm] Depth: 4.8" [120 mm] Height: .0" [25 mm]
Single-mode.Environment: 0 50C operating, 5% 95% humidity non-condensing, 0 10,000 ft. altitude
Single-mode.Switches: Switch 1: Fiber Auto-Negotiation on/off Switch 2: Link Pass Through on/off Switch 3&4: Pause configuration determined by combined setting
Multimode.Sfmff1324-280: Min TX PWR: -10.0 dBm Max TX PWR: -3.0 dBm RX Sensitivity: -17.0 dBm Max In PWR: -3.0 dBm Link Budget: 7.00 dB
Single-mode.Sfmff1314-280: Min TX PWR: -9.5 dBm Max TX PWR: -3.0 dBm RX Sensitivity: -20.0 dBm Max In PWR: -3.0 dBm Link Budget: 10.50 dB
Single-mode.Sfmff1315-280: Min TX PWR: -5.0 dBm Max TX PWR: 0.0 dBm RX Sensitivity: -24.0 dBm Max In PWR: -3.0 dBm Link Budget: 19.00 dB
Single-mode.Sfmff1329-286: Min TX PWR: -2.0 dBm Max TX PWR: 3.0 dBm RX Sensitivity: -26.0 dBm Max In PWR: -3.0 dBm Link Budget: 24.00 dB
Single-mode.Sfmff1329-281: Min TX PWR: -8.0 dBm Max TX PWR: -3.0 dBm RX Sensitivity: -21.0 dBm Max In PWR: -3.0 dBm Link Budget: 13.00 dB
Single-mode.Sfmff1329-282: Min TX PWR: -3.0 dBm Max TX PWR: 2.0 dBm RX Sensitivity: -23.0 dBm Max In PWR: -3.0 dBm Link Budget: 20.00 dB
Single-mode.Sfmff1317-280: Min TX PWR: -3.0 dBm Max TX PWR: 3.0 dBm RX Sensitivity: -24.0 dBm Max In PWR: -3.0 dBm Link Budget: 21.00 dB
Single-mode.Sfmff1335-280: Min TX PWR: 0.0 dBm Max TX PWR: 5.0 dBm RX Sensitivity: -27.0 dBm Max In PWR: -3.0 dBm Link Budget: 27.00 dB
Single-mode.Sfmff1329-283: Min TX PWR: -3.0 dBm Max TX PWR: 2.0 dBm RX Sensitivity: -23.0 dBm Max In PWR: -3.0 dBm Link Budget: 20.00 dB
Single-mode.Sfmff1329-287: Min TX PWR: -2.0 dBm Max TX PWR: 3.0 dBm RX Sensitivity: -26.0 dBm Max In PWR: -3.0 dBm Link Budget: 24.00 dB
Multimode.Sfmff1314-280 & Sfmff1315-280 & Sfmff1317-280 & Sfmff1324-280 & Sfmff1329-280 & Sfmff1329-281 & Sfmff13

Tech Info

Tech Info and Standards: IEEE Std. 802.3(tm) Single-mode.
Regulatory Compliance: EN55024 CISPR22/EN55022 Class A FCC Class A CE Mark